Description
Metric
Imperial
Main Dimensions & Performance Data
| d | 65 mm | Bore diameter |
| D | 85 mm | Outside diameter |
| B | 10 mm | Width |
| Cr | 15,200 N | Basic dynamic load rating, radial |
| C0r | 15,800 N | Basic static load rating, radial |
| Cur | 1,000 N | Fatigue load limit, radial |
| nG | 9,600 1/min | Limiting speed |
| nϑr | 4,850 1/min | Reference speed |
| ≈m | 0.126 kg | Weight |
Mounting dimensions
| da min | 68.2 mm | Minimum diameter of shaft shoulder |
| Da max | 81.8 mm | Maximum diameter of housing shoulder |
| Db max | 83 mm | Maximum diameter of housing shoulder |
| ra max | 0.6 mm | Maximum fillet radius of shaft |
| ra1 max | 0.3 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 0.6 mm | Minimum chamfer dimension |
| r1 min | 0.3 mm | Minimum chamfer dimension |
| D1 | 77 mm | Shoulder diameter on outer ring wide side face |
| d1 | 73 mm | Shoulder diameter on inner ring wide side face |
| a | 36.5 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| Amin | 0 µm | Axial clearance per set min. |
| Tol(+) | 6 µm | Tolerance for axial clearance or preload per set |
Your current product variant
| Design variant | B | Design variant B |
| Sealing | Without | not sealed |
| Cage | TVP | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P5 | Class5 (P5), better than P6 |
| Bearing with matched conditions for fitting in pairs | UO | bearing set clearance-free in O or X arrangement |
| Lubricant | Without | Bearing not greased |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
Characteristics
